Push-pull type micro-planar magnetic driver "Ortho" 

"Typ 821" is a fully developed micro tuner magnetic driver "ortho". There are two types of planner drivers: push pull drive and single drive type. "Oro" uses push pull type. Against the diaphragm μ It is driven by the magnet which is placed in the front and back of the thin and thin vibrating plate of Coyle in the order of the order of five magnets.

The push-pull drive type is a driver with a good response by driving the diaphragm with a magnet. Therefore, it is a driver with a very sound character which expresses a strong bass and a delicate bass. However, it is difficult to use the small and powerful magnet to increase the difficulty of the built-in. Therefore, the case used in large products like high end headphones was the mainstream in the past. In the "ortho", the skilled engineer of the dynamic driver overlapped trial and error, and realized the high quality push pull type driver which can be used in earphone size.

A high performance management architecture for MIAA

The original housing architecture "MIAA: Mado in ear acoustic architecture" has been adopted from the conventional model to improve the reliability and to achieve maximum performance. All products are developed based on this architecture.

We call it an acoustic box for parts that store drivers. This acoustic box is manufactured by a 3D print process and has a complex acoustic circuit called skimatic design. For the 3D print part, the preparation resin is adopted, and the curing process of pre cure and post cure in the manufacturing process is thorough, 5 μ It enabled the manufacture of very precise parts managed at the m level. Thus, the quality is strictly controlled, and the individual difference in manufacturing can be suppressed, and the user can enjoy the intended sound quality as it is.

Sapphire crystal with aesthetics and function

The design concept of madoo is designed with images of submarine and clock windows. This is due to the concept of earphones that can be used for many years. We looked at the material that was suitable for the window and met the sapphire crystal.

Sapphire crystal is a material that is more beautiful than glass and plastic and has a beautiful look, and is also used for a high-class watch. Mohs hardness is 9% very high scratch resistant material. For the concept of earphones used for many years, it was the best material to have heat resistance and corrosion resistance that could not be obtained with glass or plastic material. In addition, the function of the speaker unit can be obtained by controlling the back pressure of the speaker unit by the void system provided in the window in the function side.

In typ 821, the design of the window is new as a second generation position for the existing model. It was designed to be a new face of Mado, which reminds me of the 8 "screw of the submarine, which was the original concept.

High rigid housing

The original housing architecture "MIAA: Mado in ear acoustic architecture" has been adopted from the conventional model to improve the reliability and to achieve maximum performance. All products are developed based on this architecture.

We call it an acoustic box for parts that store drivers. This acoustic box is manufactured by a 3D print process and has a complex acoustic circuit called skimatic design. For the 3D print part, the preparation resin is adopted, and the curing process of pre cure and post cure in the manufacturing process is thorough, 5 μ It enabled the manufacture of very precise parts managed at the m level. Thus, the quality is strictly controlled, and the individual difference in manufacturing can be suppressed, and the user can enjoy the intended sound quality as it is.

Optimized shape derived from 300 ear types

In the international standard, Europe and America are mainly based on the ears, but it is very large compared with Asian ears, and there are many problems in fitting. On the other hand, Maine Marquette of the real luxury earphone is centered on Japan such as Japan, China and Korea. We focused on it and collected 300 male male ear types from these areas for about three years and led the best shape based on this. "Typ 821" reflects the ear type of 100 people for a year and brushes up the shape of the box. This made it into a housing compatible with further quality fit and design. Also, the stem adopts an elliptical stem like the conventional model. Since the person is elliptical in many cases, the transmission is realized without loss of natural mounting feeling and madoo sound design to the ear hole.

Custom cables by acoustune

The earphone cable adopts a two core x2 4-core cable made of silver coated copper wire by the brother brand acoustune.

The performance of the earphone is firmly demonstrated by the cable with reduced sound loss. It adopts a new IEM connector, pentaconn ear (pentacon ear) connector, which has high sound quality and high reliability to be designed and produced by Japan dicks. The plug portion and the socket portion are more closely contacted than the conventional MMCX connector and excellent in the conductive performance. In addition, the ease of desorbing and fastness are realized.

This product comes with a standard package of "mrc011" of 3.5mm 3 pole L-shaped gold plated plug and "mrc023" of 4.4mm 5 pole L-shaped plug.

Spec's

 

Tags

Headphones In Ear Monitor MADOO Reviews

• Share on:
• WhatsApp
• Deel
• Tweet
• Pin it
• Messenger
• Email

---